Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that is slightly less dense than air.
It is toxic to humans and animals when encountered in higher concentrations, although it is also produced in normal animal metabolism in low quantities,
and is thought to have some normal biological functions. Carbon monoxide is produced from the partial oxidation of carbon-containing compounds;
it forms when there is not enough oxygen to produce carbon dioxide (CO2), such as when operating a stove or an internal combustion engine in an enclosed space.
AVC-110 series is designed for monitoring the Carbon monoxide concentration in order to avoid poor ventilation.
In addition to provide a value display(optional), AVC-110 provides different signal output options and one relay output for monitoring, analyzing and alarm.
Applied with ventilation system, it can efficiently control and ameliorate air quality. Perfectly for basement parking, garage, residential apartment, offices or factories.
It is toxic to humans and animals when encountered in higher concentrations, although it is also produced in normal animal metabolism in low quantities,
and is thought to have some normal biological functions. Carbon monoxide is produced from the partial oxidation of carbon-containing compounds;
it forms when there is not enough oxygen to produce carbon dioxide (CO2), such as when operating a stove or an internal combustion engine in an enclosed space.
AVC-110 series is designed for monitoring the Carbon monoxide concentration in order to avoid poor ventilation.
In addition to provide a value display(optional), AVC-110 provides different signal output options and one relay output for monitoring, analyzing and alarm.
Applied with ventilation system, it can efficiently control and ameliorate air quality. Perfectly for basement parking, garage, residential apartment, offices or factories.
| Model No | AVC-110 |
|---|---|
| Measuring method | Chemical-electro |
| Response time | τ90 ≦ 30 秒 |
| Accuracy (at 25℃) | ±5% for 0~100ppm ; ±10% for 100~250ppm |
| Repeatability | Reading ± 2 % |
| Zero drift | ≦5% / yr. |
| Measuring range | 0~100ppm ; 0~250ppm |
| Signal output | DC 4 ~ 20mA/ DC 0 ~ 10 V/RS-485 (Modbus RTU) |
| Alarm output | Relay output N.O,N.C ( 2A / 30V DC) ; Relay setting 50 ppm |
| Linearity error | ＜10 ppm ( at -10℃~ 50 ℃) |
| Calibration interval (recommended) | 12 months |
| Pressure range | 1 atm ± 10 % |
| Environmental | -10℃ ~ 50℃ ; 15 ~ 90%RH |
| Transportation & storage | -10℃~ 50℃ |
| Warm-up time | ≤ 1.5 min. ( Full scale，≤ 15 minutes) |
| Power supply | 12 ~ 36V AC/DC，50/60Hz |
| Installation | Wall-mount |
| Dimensions (mm) | 113.57(H) x 80(W) x 28.79(D) |
| Case material | ABS |
| Protection rate | IP30 |
| *All information is subject to change without prior notice. | |