ProductsSensor and detectorBean SensorPhotoelectric Curtain Beam Sensor
*
*
SB-PHC50L/100L/150L/200L
Photoelectric Curtain Beam Sensor
  • PHC-50L/100L/150L/200L is designed with 4/8/12/16 beams respectively for different demands in both indoor and outdoor.
  • To prevent false alarm, two(2) beams cut synchronously is absolutelyrequired for getting alarm output.
  • Reliable mechanical structure design with protection against rain and insect.
  • There are four(4) infrared output power on the transmitter unit for option according to the distance requirement.
  • Red LED with alignment checking purpose to make installation job done properly.
  • Buzzer JUMP setting with sound option during alarm initiated.
  • Easy & quick installation.
Inquiry
Back
  1. PHC-50L/100L/150L/200L is designed with 4/8/12/16 beams respectively for different demands in both indoor and outdoor.
  2. To prevent false alarm, two(2) beams cut synchronously is absolutelyrequired for getting alarm output.
  3. Reliable mechanical structure design with protection against rain and insect.
  4. There are four(4) infrared output power on the transmitter unit for option according to the distance requirement.
  5. Red LED with alignment checking purpose to make installation job done properly.
  6. Buzzer JUMP setting with sound option during alarm initiated.
  7. Easy & quick installation.
  • Please read this instruction manual carefully for correct and effective use.If you do not understand these instructions, contact your supplier for further information
     
  • This sensor is designed to detect intrusion and to activate an alarm. It only provides an alarm sign output, and is not an independent burglar-preventing device. If it's used abnormally,faulty installation,improper maintenance or Acts of God, it will cause damage.
 
Item.PHC-50LPHC-100LPHC-150LPHC-200L
Detection Range10m
Power Supply10.5V~28VDC (12V is recommended)
TX CurrentA=18mA
B=19mA
C=22mA
D=31mA		A=18mA
B=19mA
C=26mA
D=42mA		A=18mA
B=19mA
C=29mA
D=51mA		A=18mA
B=19mA
C=33mA
D=60mA
RX Current40mA46mA52mA58mA
No. of beams2 dual 4 beams4 dual 8 beams6 dual 12 beams8 dual 16 beams
PhotoelectricIR LED pulsed beam
DetectionBreaking off 1 dual 2 beams or two adjacent
Response TimeBreaking off 2 dual 4 beams (adjacent) : 50 msec. Breaking off 1 dual 2 beams : 100 msec.
Alarm OutputDry connect relay : NC./ NO. 0.2A / 28VDC (RX)
Contact action: >2 sec.
Tamper OutputDry connect Micro-SW : NC. 0.2A / 28VDC
Action : cover is detached.(TX & RX)
LED1. Red LED ON: When an alarm is initiated ( RX ).
2. LED Flashing ( RX ):When receiver signal is weak.
3. Green LED ON: Power on ( TX )
Functions1. IR Power Set: 4 Level ( TX )
2. Buzzer would sound when beam is blocked.( The sound function is optional. )
3. Red LED with alignment checking purpose.
4. One dual with 2 beams.
5. With sunlight resistance.
Temperature-13℉ to +131℉ ( -25℃ to +55℃ )
MountingIndoor / Outdoor
WiringTerminals
AccessoriesScrews ( Self tapping 4 x 25mm ) x 4.
OptionMounting Plate x4 (Screws(M4X16mm)x4 / Self tapping(4X20mm)x8 ).