General | |
Type | Wall mount |
---|---|
Parameters | CO2, Relative Humidity, Temperature |
Operating Environment | -10 ~ 60 ℃ / 0 ~ 95%RH, non-condensing |
Storage temperature | -10~60 ℃ |
Clock | Real time clock with battery backup |
Power supply | 12 VDC (supply with an AC adapter 100~240V / 50~60Hz ) |
Current consumption | 1.2A (max) |
Display | 7 segment LED display |
Memory capacity | 60000 values |
CO2 Measurement | |
Measurement principle | Non-dispersive infrared (NDIR) with automatic calibration |
Measurement range | 0~9999 ppm |
Accuracy tolerance | 0~2000ppm ± 3% and ± 40 ppm note1 and 2 |
Response time | 2 minutes by 90% |
Maintenance | Maintenance-free for normal indoor applications |
Environmental | -10 ~ 60 ℃/ 0 ~ 95%RH, non-condensation |
Display digit | 4 digits, 0 ~ 9999 |
Relay setting | 1200ppm |
Hysteresis | 100ppm |
Humidity Measurement | |
Measurement range | 0 ~ 95 %RH |
Accuracy tolerance | ± 3 %RH (typical) |
Repeatability | ± 0.1 %RH |
Response time τ63 | < 8 s (τ63%, 25℃) |
Long-term drift | < 0.5 %RH / year |
Display digit | 2 digits, 0 ~ 99 |
Relay setting | 70%RH |
Hysteresis | 5%RH |
Temperature Measurement | |
Measurement range | -10 ~ 60 ℃ |
Accuracy tolerance | ± 0.3 ℃ (typical) |
Repeatability | ± 0.1 ℃ |
Response time τ63 | 5 ~ 30 s (τ63%, 25℃) |
Long-term drift | < 0.04 ℃/ year |
Display digit | 3 digits (One decimal point), 0.0 ~ 99.9 |
Relay setting | 28℃ |
Hysteresis | 1℃ |
Outputs | |
RS-485 | RS485 (Modbus RTU) |
Relay | 3 Relay outputs for CO2, relative humidity, and temperature respectively. N.O. and N.C. (2A/30VDC) |
Mechanical | |
Housing material | PMMA panel (4mm), SPCC casing (1mm) |
Dimensions | 527 x 217 x 32 mm |
Weight | 2600g |
Note 1: In normal IAQ applications. Accuracy is defined after minimum 3 weeks of continuous operation with ABC. However, some industrial applications do require maintenance.℃ Note 2: Accuracy is specified at room temperature +25°C and at normal pressure 101.3 kPa. Specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (+-1% currently) is to be added to the specified accuracy for absolute measurements. |